/\/\orphor  |  ECHON 6 Configurator
  • Preset Manager
  • Global Settings
  • ECHON 6
  • Admin
  • Preset Manager
  • Global Settings
  • ECHON 6
  • Admin
  • Device Info

    Serial Number: —
    Firmware Version: —
    Firmware build: —
    UUID: —
    Power-Ups: —
    Total Runtime: —

    Install Firmware

    Performing a firmware install will not remove currently stored presets and global settings.

    Troubleshooting

    If an update was aborted and ECHON 6 is no longer available via MIDI/SysEx, close the "ECHON 6 Not Found" dialog, restart while holding the WRITE key to enter bootloader mode, then press Flash Selected Firmware under the ECHON 6 - Install Firmware section. If you cannot flash ECHON 6, manually activate bootloader mode by holding the WRITE button during startup before pressing Flash Selected Firmware.

    Factory Reset

    Performing a factory reset will remove currently stored presets and global settings and restore the original presets and original global settings.

    Backup All Presets and Global Settings

    Create or restore all presets and global settings.

    Download Backup

    Create a backup file from the currently connected ECHON 6.

    Upload Backup

    Restore a backup file to ECHON 6.

    No file selected

  • Preset Manager

    • Bank 1
    • Bank 2
    • Bank 3
    • Bank 4
    • Bank 5
    • Bank 6
    —/216 used
  • Global Settings

    Advanced i
  • Hard Bootloader + Firmware Flash

    Put the device into STM32 bootloader mode manually (hold LEGATO at startup). Use this in two steps: Step 1 performs STM32 mass erase + bootloader flash (*_bootloader.bin to 0x08000000). Step 2 flashes the selected app firmware (same flow as the ECHON 6 tab).

    Factory Reset

    Serial Number

    Current Serial: —

    Note: device firmware may reject serial changes once a serial is already set.

    Advanced Global Settings

    Admin Access

Admin Access

Enter admin password.

Invalid password

Copyright © 2026 Morphor. All rights reserved.
v.1.0.0

Edit Metadata

Move Preset

Moving:

If the destination slot is occupied its content will be overwritten.

Bulk Upload Presets

If unchecked, uploads only fill empty slots from the selected start slot onward.

Uploading Presets

Preparing…

Confirm

Export Preset Overview PDF

Choose what to include in the exported PDF.

Backup

Preparing…

Confirm